View EL6834_1049516.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(R)
EL6834
Data Sheet July 15, 2004 FN7238.1
PRELIMINARY
Dual 4-Channel Driver with Oscillator & LVDS
The EL6834 is a high performance, dual output, laser driver for writeable `super-combo' CD - DVD drives. The ENA pin enables the chip, while the SEL1 pin selects the IOUT pin. Various waveforms can be generated where the amplitude is determined by the currents flowing into IINR, IIN2, IIN3, and IIN4. The timing is determined by the signals at WEN2-WEN2B, WEN3-WEN3B, and WEN4-WEN4B. The oscillator is enabled when OSEN is high. The amplified IINR current of the selected channel is enabled when the ENA pin is high. The total output current is the sum of the read current, the enabled write currents, and the oscillator current when enabled. Usually a voltage DAC will drive a resistor that is in series with the IINR, IIN2, IIN3, and IIN4 input. The resistor allows the user to optimize the current gain for each channel. Output write current pulses are enabled when a high is applied to the WEN2-WEN2B, WEN3-WEN3B, or WENWEN4B pin. The write current will flow to the selected output. When SEL1 is high IOUT1 is selected. WENRB enables read and oscillator current when low. The RF oscillators frequency is determined by RFREQ1 or RFREQ2, and its amplitude by RAMP1 or RAMP2.
Features
* Two channels for CD or DVD * Voltage-controlled output current source requiring one external set resistor per channel * Rise time = 0.8ns * Fall time = 0.8ns * Channel 2 to 250mA max * Channel 3 to 150mA max * Channel 4 to 100mA max * On chip oscillator with frequency and amplitude control by use of external resistors to ground * Oscillator frequency to 600MHz * Internal 100 LVDS termination * Oscillator amplitude to 100mAP-P * Single +5V supply (10%) * Chip ENAs for power savings * Pb-free available
Applications
* Super combo drives
Ordering Information
PART NUMBER EL6834CL EL6834CL-T7 EL6834CL-T13 EL6834CLZ (See Note) EL6834CLZ-T7 (See Note) EL6834CLZT13 (See Note) PACKAGE 32-Pin QFN 32-Pin QFN 32-Pin QFN 32-Pin QFN (Pb-free) 32-Pin QFN (Pb-free) 32-Pin QFN (Pb-free) TAPE & REEL 7" 13" 7" 13" PKG. DWG. # MDP0046 MDP0046 MDP0046 MDP0046 MDP0046 MDP0046
Get FULL DATASHEET
NOTE: Intersil Pb-free products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which is compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J Std-020B.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright (c) Intersil Americas Inc. 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc. All other trademarks mentioned are the property of their respective owners.
EL6834
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com 2

▲Up To Search▲

Price & Availability of EL6834

	To Download EL6834 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .